CMM-10/15 OIL PURIFICATION PLANT

    GlobeCore

    LEAVE A MESSAGE


    Please fill this line so we can call out to you by name

    Please fill this line so we can answer your questions

    Please fill this line so we can call you back

    The CMM 10/15 unit is built as a self-contained unit with all components and operating assemblies protected by metal panels and easy opening gas-spring loaded doors on the sides and back of the unit. The “Containerized”unit is placed on a tandem axle trailer that is street legal and ready to be towed to any remote  location.

    The unit consists of a vacuum chamber, input and output oil pumps, coarse and fine filters, oil trap, oil heater, pipelines with valves, vacuum pump section and a control cabinet.

    TECHNICAL SPECIFICATIONS OF CMM-10/15 Oil Degassing Unit

    Parameter Value
    Capacity, m3/hour / gals. per hour:
    • degassing, drying and filtration mode
    8/2117
    • heating and filtration mode
    15/3970
    Processed oil parameters*:
    • volumetric gas content %, max
    0.1
    • mass moisture content, g/ton, max
    3.0
    • filtration fineness, micron
    1
    Oil output temperature in heating mode, ºС/ ºF 90/194
    Outlet pressure, MPa 0.4
    Oil heater power, kW 180
    Max power consumption, kW 210
    Residual pressure in vacuum chamber during degassing, mbar, max 267
    Residual pressure in vacuum chamber during air tightness test, mbar, max 26.7
    Air leak into the chamber in 1 hour, mbar max: 267
    Electric power parameters
    • voltage, V
    415
    • AC frequency, Hz**
    50/60
    Dimensions, mm/ft, max
    • length
    4750/15’7’’
    • height
    2100/6’11’’
    • width
    2320/7’7’’
    Weight, kg/lbs, max 3500/7735

    Note: * initial oil parameters:

    • volumetric gas content – below 5%;
    • mass moisture content – below 01% (100 g/ton);
    • temperature – above 0 ºС/ 32 ºF.

    **All equipment sold in the USA is designed to operate on 60 Hz AC Power