ZEOLITE REGENERATION UNITS BRZ

 

The BRZ Regeneration unit is designed to restore the performance of the CP-260 sorbent cartridges used in drying dielectric insulating oil.

The BRZ unit regenerates the cartridges by the use of hot air to purge and clean the cartridges of excess moisture.

The BRZ unit can be used by any facility using the CP-260 cartridges for the drying of lubricating and insulating oils.

Technical specification

Parameter Value
Heater power, kW 10.8
Cooler blower drive power, kW 0.75
Nominal power, kW 13.2
Zeolite drying mode parameters
  • air blower throughput, m3/minute
2.3
  • hot air temperature, oC/F
250/483
Vacuum pulling mode parameters
  • evacuation rate, l/second
6.6
  • residual pressure,mbar (mPa)
250
Dimensions, mm/ft:
  • length
1100/3’3’’
  • width
650/2’2’’
  • height
1250/4’1’’
Weight, kg/lbs 220/486.2

    GlobeCore

    LEAVE A MESSAGE


    Please fill this line so we can call out to you by name

    Please fill this line so we can answer your questions

    Please fill this line so we can call you back