UVB-2-L bitumen modification laboratory system is designed for preparation of small samples (no more than 10 liters per batch) of modified bitumen.
The system uses continuous bitumen mixing process with further dispersion of bitumen and polymer in the mill. Unit design allows for addition of other liquid components in the process of bitumen modification.
The unit can be used by petrochemical facilities for optimization of modified bitumen production process, determining the required amount of modifying additives and using the prepared bitumen as a laboratory sample.
|Main load vessel volume, liters||24|
|Minimum bitumen load in vessel, liters||10|
|Maximum bitumen load in vessel, liters||12|
|Modified bitumen preparation process||Dispersion of bitumen and
polymer in mill
|Pump capacity, l/min||30|
|Max temperature of bitumen preparation, °C||190|
|Minimum bitumen input temperature, °C||160|
|Heating of liquid in the tank and pipelines||By heat carrier|
|Heater power, kW||4.8|
|Component controls||Automation assisted|
|Max power consumption, kW||15|
|Dimensions (L/W/H), mm||1630/770/1800|
|Max net weight, kg||420|