GlobeCore / Products / CMM-10/15 OIL PURIFICATION PLANT

CMM-10/15 OIL PURIFICATION PLANT

The CMM 10/15 unit is built as a self-contained unit with all components and operating assemblies protected by metal panels and easy opening gas-spring loaded doors on the sides and back of the unit. The “Containerized”unit is placed on a tandem axle trailer that is street legal and ready to be towed to any remote location.

The unit consists of a vacuum chamber, input and output oil pumps, coarse and fine filters, oil trap, oil heater, pipelines with valves, vacuum pump section and a control cabinet.

TECHNICAL SPECIFICATIONS OF CMM-10/15 Oil Degassing Unit

Parameter	Value
Capacity, m3/hour / gals. per hour:
degassing, drying and filtration mode	8/2117
heating and filtration mode	15/3970
Processed oil parameters*:
volumetric gas content %, max	0.1
mass moisture content, g/ton, max	3.0
filtration fineness, micron	1
Oil output temperature in heating mode, ºС/ ºF	90/194
Outlet pressure, MPa	0.4
Oil heater power, kW	180
Max power consumption, kW	210
Residual pressure in vacuum chamber during degassing, mbar, max	267
Residual pressure in vacuum chamber during air tightness test, mbar, max	26.7
Air leak into the chamber in 1 hour, mbar max:	267
Electric power parameters
voltage, V	415
AC frequency, Hz**	50/60
Dimensions, mm/ft, max
length	4750/15’7’’
height	2100/6’11’’
width	2320/7’7’’
Weight, kg/lbs, max	3500/7735

Note: * initial oil parameters:

volumetric gas content – below 5%;
mass moisture content – below 01% (100 g/ton);
temperature – above 0 ºС/ 32 ºF.

**All equipment sold in the USA is designed to operate on 60 Hz AC Power

CMM-10/15 OIL PURIFICATION PLANT

TECHNICAL SPECIFICATIONS OF CMM-10/15 Oil Degassing Unit

LEAVE A MESSAGE