ZP Sorbent Cartridges

    GlobeCore

    LEAVE A MESSAGE


    Please fill this line so we can call out to you by name

    Please fill this line so we can answer your questions

    Please fill this line so we can call you back


    ZP sorbent1A sorbent is a material used to absorb or adsorb liquids or gases. cartridges are designed for drying2The drying process should be carried out to remove water from zeolite. of lubrication3Lubrication is the process or technique of using a lubricant to reduce friction and/or wear in a contact between two surfaces. and electrical insulation oils4Insulating oil is an oil that is stable at high temperatures and has excellent electrical insulating properties. by zeolite5Zeolites are microporous, aluminosilicate minerals commonly used as commercial adsorbents and catalysts. or other adsorbents. The unit is equipped with hatches for quick sorbent loading and unloading.  The cartridges of the ZP unit can be filled not only with zeolite, but with other adsorbents, such as Fuller’s earth6Fuller’s earth is any clay material that has the capability to decolorize oil or other liquids without chemical treatment. or silica gel7Silica gel is an amorphous and porous form of silicon dioxide (silica), consisting of an irregular tridimensional framework of alternating silicon and oxygen atoms with nanometer-scale voids and pores., making the unit suitable for oil regeneration8Oil regeneration – is extraction of contaminants from oil in order to restore its original properties to be used equally with fresh oils. and acidity9Acid value (or neutralization number or acid number or acidity) is the mass of potassium hydroxide (KOH) in milligrams that is required to neutralize one gram of transformer oil. reduction.

    Parameter

    Value

    ZP-130

    ZP-260

    Throughput, m3/hour (gpm)

    2 (8.8)

    4 (17.6)

    Number of vessels

    1

    2

    Total geometric vessel volume, liters (gallons)

    130 (34.34)

    260 (68.68)

    Oil ISO 4406 purity class

    -/14/12

    -/14/12

    Vessel use mode

    Consecutive only

    Parallel or consecutive

    Filtration, μm

    5 (1 optionally)

    5 (1 optionally)

    Max oil inlet temperature, °С (°F) 40 (104) 40 (104)
    Dimensions, mm (in)
    – length 900 (35.43) 1100 (43.3)
    – width 760 (29.92) 1000 (39.37)
    – height 2100 (82.67) 2020 (79.52)
    Weight, kg (lbs) 170 (374.78) 490 (1080.27)

    • simple operation and servicing;
    • oil service life extension;
    • various configurations (stationary or mobile);
    • sorbent regeneration with a BRZ-100 unit with subsequent reuse of the sorbent for oil processing.